Air Shower is designed to supply HEPA filtered air at high velocity to remove particulate matter from the person entering the Clean Room.
Air Showers are self-contained chambers installed at entrances to clean rooms and other controlled environments. They minimize particulate matter entering or exiting the clean space. Personnel and materials entering or exiting the controlled environment are “scrubbed” by high velocity HEPA-filtered air jets with velocities of 20 ± 2 mps per nozzle. Contaminated air is then drawn through the base within the unit, filtered and recirculated.  Air showers for demanding applications in the micro-electronics, semiconductors, pharmaceutical, spray painting, lab animal research and food markets. 
The greatest source of particulate contamination in a clean room is the operator. Air showers are installed between change areas and the clean room. The air shower enhances clean room operating protocol by serving as a reminder to all operators that they are entering a controlled environment. Personnel therefore develop the habit of gowning up properly before entering the air shower. 

Material of Construction:
SS 304 / SS 316/ SS 316L / G.I Powder Coated.

Standard Features
⦁ Minipleat HEPA Filter EU-14 Grade, efficiency 99.999% down to 0.3μ.
⦁ Prefilters EU 6 Grade with average efficiency of 60-80% down to 5 μ.
⦁ AC Centrifugal Motor Blower with Regulator for speed controlling.
⦁ Magnehelic Differential Pressure Gauge.
⦁ Electro-Magnetic Interlocking card with OLED display controlling on either side of door to ensure that only one side door can be opened at a time. Manual On-Off Switches for Blower & LED Light adjustable Timer to set operation time.
⦁ SS 304, Mirror finish Nozzle for spraying the air.
⦁ SS Perforated Trays as footrest floor in bottom for air circulation.
⦁ SS Back to back handles on both sides for door opening
⦁ SS 304 double walled doors with toughened glass with SS 304 Handles & Hinges.
⦁ LED down light with 400 LUX.
⦁ PAO Test port for HEPA filter integrity test.
⦁ Emergency stop switch to shut off equipment in an emergency.
⦁ Door closer for closing doors.
⦁ SS 304 access panel inside of the unit for service & maintenance.

Options and Accessories available at an extra cost
⦁ PLC with Touch Screen HMI display controlling with Electro-Magnetic Interlocking system to ensure that only one side door can be opened at a time & adjustable Timer to set operation time.
⦁ Digital/Photohelic Gauge with High / Low Indicators

Performance
⦁ Air Velocities : 20 ± 2 mps per nozzle
⦁ Air Flow : Recirculatory
⦁ Noise Level : Less than 75 dB on Scale ‘A’
⦁ Vibration Level: Minimum

Power Supply
⦁ 415 V AC, 3Ø – 50-60HZ

STANDARD DIMENSIONS