Home / Products
Dynamic Pass Box is designed to allow material transfer through controlled environment without much personnel movement. Furthermore, this box help in prevention of contaminants entrance either in the clean room or between various classified areas. Dynamic Pass Box that we deliver in the market is accessible at most economical prices.
MATERIAL OF CONSTRUCTION
SS 304 / SS 316 / SS 316L / G.I Powder Coated.
STANDARD FEATURES
OPTIONS & ACCESSORIES AVAILABLE AT AN EXTRA COST
POWER SUPPLY
PERFORMANCE
✓ Air cleanliness : ISO Class 5 (ISO 14644-1:1999 (E)) / Class 100
✓ Air Velocities: 0.45 ± 0.05 mps@ 6 Inch below HEPA Terminal
✓ Air Flow: Vertical – Recirculatory
✓ Noise Level: Less than 75 dB on Scale ‘A’
✓ Vibration Level: Minimum
STANDARD DIMENSIONS
Static Pass Box designed to allow material transfer through controlled environment without much personnel movement to minimize man /material movement.
MATERIAL OF CONSTRUCTION
SS 304 / SS 316 / SS 316L / G.I Powder Coated.
STANDARD FEATURES
OPTIONS & ACCESSORIES AVAILABLE AT AN EXTRA COST
POWER SUPPLY
STANDARD DIMENSIONS
Stand Mounted Vertical Laminar Flow Benches offers highest product protection for samples and processes by providing ISO Class 5 particle free work area. Vertical Laminar Air Flow Unit draws air in through the top of the unit through a pre-filter, through a plenum and vertically down over the work-surface and past the lap of the operator.
It prevents contamination from operator and environment to work area. The laminarity of the flow prevents cross contamination between the items handled in the working space. These units are suitable for the handling of non-hazardous products, sensible to dust and/or to contamination wherever operator protection is not required.
Material of Construction:
SS 304 / SS 316/ SS 316L / G.I Powder Coated.
Standard Features
⦁ Minipleat HEPA Filter EU-14 Grade, efficiency 99.999% down to 0.3μ.
⦁ Pre filters EU 6 Grade with average efficiency of 60-80% down to 5 μ.
⦁ AC Centrifugal Motor Blower with Regulator for speed controlling.
⦁ Magnehelic Differential Pressure Gauge.
⦁ Led Light with SS covering.
⦁ U. V. Light providing 256nm wavelength with Hour Meter.
⦁ SS ON/OFF Switches for Motor Blower, UV Light & LED Lights.
⦁ PAO Test port for HEPA filter integrity test.
⦁ SS304 access panel on front & back side for service & maintenance.
⦁ SS 304 Perforated Grills for HEPA Filter.
⦁ SS 304 stands with Nylon Leveling lugs.
⦁ 6/16 Amp single-phase switch socket for any external equipment.
⦁ Antistatic PVC Strip overlapping curtains for laminarity in all sides of the unit.
Options and Accessories available at an extra cost
⦁ Audio / Visual alarm for blower tripping with Fault Acknowledgement & Reset Switch.
⦁ Digital/Photohelic Gauge with High / Low Indicators.
⦁ Foldable polycarbonate front door & side View panels.
⦁ Variable Frequency Drive for motor blower for speed controlling.
⦁ Flame Proof Execution as Explosion proof electrics for Flame-proof
applications
Power Supply
⦁ 230 VAC, 1Ph, 50-60Hz & for FLP 415 VAC, 3Ph, 50-60Hz
STANDARD DIMENSIONS
Horizontal Laminar Air Flow Unit that we deliver in the market is known for its robust construction, smooth functioning, and unsurpassable performance. Horizontal Laminar Flow Benches offers highest product protection for samples and processes by providing ISO Class 5 particle free work area. The work area is continuously supplied with positive pressure HEPA filtered Horizontal air flow.
Material of Construction:
SS 304 / SS 316/ SS 316L / G.I Powder Coated.
Standard Features:
⦁ Minipleat HEPA Filter EU-14 Grade, efficiency 99.999% down to 0.3μ
⦁ Pre filters EU 6 Grade with average efficiency of 60-80% down to 5 μ.
⦁ AC Centrifugal Motor Blower with Regulator for speed controlling
⦁ Magnehelic Differential Pressure Gauge
⦁ Toughened Glass side View panels
⦁ 6/16 Amp single-phase switch socket for any external equipment.
⦁ U. V. Light providing 256nm wavelength with Hour Meter for counting the burning hours
⦁ Led Light with SS covering
⦁ SS ON/OFF Switches for motor & Lights
⦁ PAO Test port for HEPA filter integrity test.
⦁ Cabinet supports stand with leveling pads.
⦁ SS 304 Perforated Grills for HEPA Filter.
Options & Accessories available at an Extra Cost
⦁ Audio / Visual alarm for blower tripping with Fault Acknowledgement & Reset Switch
⦁ Gas cock for provision for cleaning or any gas required in the unit
⦁ SS 304 stands with PU Caster Wheel for movement: 2 lockable & 2 Regular.
⦁ Digital/Photohelic Gauge with High / Low Indicators
⦁ Foldable polycarbonate front door & Polycarbonate side View panels
⦁ Variable Frequency Drive for motor blower or speed controlling.
⦁ Flame Proof Execution as Explosion proof electrics for Flame-proof applications.
Power Supply
⦁ 230 VAC, 1 Phase, 50 Hz & for FLP 415 VAC, 3 Phase, 50 Hz
Performance
⦁ Air cleanliness: ISO Class 5 (ISO 14644-1:1999 (E)) / Class 100
⦁ Air Velocities : 0.45 ± 0.05 mps@ 6 Inch below HEPA Terminal
⦁ Air Flow : Vertical – Recirculatory
⦁ Noise Level : Less than 75 dB on Scale ‘A’
⦁ Vibration Level: Minimum
STANDARD DIMENSIONS
Ceiling Suspended Vertical Laminar Flow unit offers highest product protection for samples and processes by providing ISO Class 5 particle free work area. Vertical Laminar Air Flow Unit draws air in through the top of the unit through a pre-filter, through a plenum and vertically down over the work-surface and past the lap of the operator. It has the advantage of not pushing air into the face of the operator as in a horizontal laminar flow cabinet.
Material of Construction:
SS 304 / SS 316/ SS 316L / G.I Powder Coated.
Standard Features
⦁ Minipleat HEPA Filter EU-14 Grade, efficiency 99.999% down to 0.3μ.
⦁ Prefilters EU 6 Grade with average efficiency of 60-80% down to 5 μ.
⦁ AC Centrifugal Motor Blower with Regulator for speed controlling.
⦁ Magnehelic Differential Pressure Gauge.
⦁ Led Light with SS covering.
⦁ SS ON/OFF Switches for motor & Lights.
⦁ PAO Test port for HEPA filter integrity test.
⦁ SS 304 access panel on front side for service & maintenance.
⦁ SS 304 channels for Hepa clamps covering.
⦁ Antistatic PVC Strip overlapping curtains for laminarity in all sides of the unit up-to 2 mtr. Length.
⦁ Suspension Rod: MS above false ceiling / SS below false ceiling.
⦁ SS 304 Perforated Grills for HEPA Filter.
Options and Accessories available at an extra cost
⦁ Audio / Visual alarm for blower tripping with Fault Acknowledgement & Reset Switch.
⦁ Digital/Photohelic Gauge with High / Low Indicators.
⦁ Variable Frequency Drive for motor blower for speed controlling.
⦁ U. V. Light providing 256nm wavelength with Hour Meter.
⦁ CG Membrane screen as diffuser below HEPA filter.
⦁ Flame Proof Execution as Explosion proof electrics for Flame-proof
applications
Performance
⦁ Air cleanliness: ISO Class 5 (ISO 14644-1:1999 (E)) / Class 100
⦁ Air Velocities : 0.45 ± 0.05 mps@ 6 Inch below HEPA Terminal
⦁ Air Flow : Vertical – Recirculatory
⦁ Noise Level : Less than 75 dB on Scale ‘A’
⦁ Vibration Level: Minimum
Power Supply
⦁ 230 VAC, 1 Phase, 50 Hz & for FLP 415 VAC, 3 Phase, 50 Hz
STANDARD DIMENSIONS
Reverse Laminar Air Flow Unit designed with precision for providing highest level of protection to Product, Operator as well as to environment from airborne contaminants generated during powder handling operations such as sampling, charging & dispensing.
Furthermore, Reverse Laminar Air Flow can be customized to suit the precise requirements of the clients. The down flow booth operates on a Recirculatory airflow principle providing containment by air movement.
A clean, constant, laminar down flow of Class 100 air is supplied in work area suppressing any dust clouds generated during open powder processing, removing, and capturing airborne particles from the operator’s breathing zone. The Pre filters at the base of the rear wall capture the airborne contaminants generated. Intake velocity at pre filters increases to ensure scavenging effect.
A small percentage of air is discharged from the booth through the bleed exhaust HEPA filter to maintain the working space under negative pressure.
Material of Construction:
SS 304 / SS 316/ SS 316L / G.I Powder Coated.
Standard Features
⦁ Minipleat Exhaust & supply HEPA Filter EU-14 Grade, efficiency 99.999% down to 0.3μ.
⦁ Prefilters EU 6 Grade with average efficiency of 60-80% down to 5 μ.
⦁ Intermediate Filter EU 7 Grade, average efficiency of 80-90% to 3 μ.
⦁ AC Centrifugal Motor Blower with Regulator for speed controlling.
⦁ Magnehelic Differential Pressure Gauge 3 Nos.
⦁ HEPA Filter with respect to ambient (0 – 50 mm of WC).
⦁ Intermediate Filter with respect to ambient (0 – 25 mm of WC).
⦁ Pre filter with respect to ambient (0 – 10 mm of WC).
⦁ Led Light covered with toughened clear glass.
⦁ SS ON/OFF Switches for motor & Lights.
⦁ PAO Test port for HEPA filter integrity test.
⦁ SS 304 access panel on front for service & maintenance.
⦁ SS 304 Perforated Grills for HEPA Filter.
⦁ Antistatic PVC overlapping curtains for laminarity on front side.
⦁ SS 304 double walled Side Puff Panels.
⦁ Audio / Visual alarm for blower tripping with Fault Acknowledgement & Reset Switch.
⦁ Clean Down Timer with Operation Hold Indicator.
Options and Accessories available at an extra cost
⦁ SS Perforated Worktable with stand for weighing balance.
⦁ Digital/Photohelic Gauge with High / Low Indicators.
⦁ Air Velocity Sensor with display.
⦁ Variable Frequency Drive for motor blower for speed controlling.
⦁ U. V. Light providing 256nm wavelength with Hour Meter.
⦁ CG Membrane screen as diffuser below HEPA filter.
⦁ Safe change Bag in/Bag out arrangement for filters.
⦁ Sodium Vapor Lamps.
⦁ PLC with Touch Screen HMI.
⦁ Emergency stop switch is used to shut off RLAF in an emergency.
⦁ Flame Proof Execution as Explosion proof electrics for Flame-proof
Applications.
Performance
⦁ Air cleanliness: ISO Class 5 (ISO 14644-1:1999 (E)) / Class 100
⦁ Air Velocities : 0.45 ± 0.05 mps@ 6 Inch below HEPA Terminal
⦁ Air Flow : Vertical – Recirculatory
⦁ Noise Level : Less than 75 dB on Scale ‘A’
⦁ Vibration Level: Minimum
Power Supply
⦁ 230 VAC, 1 Phase, 50 Hz & for FLP 415 VAC, 3 Phase, 50 Hz
STANDARD DIMENSIONS
Air Shower is designed to supply HEPA filtered air at high velocity to remove particulate matter from the person entering the Clean Room.
Air Showers are self-contained chambers installed at entrances to clean rooms and other controlled environments. They minimize particulate matter entering or exiting the clean space. Personnel and materials entering or exiting the controlled environment are “scrubbed” by high velocity HEPA-filtered air jets with velocities of 20 ± 2 mps per nozzle. Contaminated air is then drawn through the base within the unit, filtered and recirculated. Air showers for demanding applications in the micro-electronics, semiconductors, pharmaceutical, spray painting, lab animal research and food markets.
The greatest source of particulate contamination in a clean room is the operator. Air showers are installed between change areas and the clean room. The air shower enhances clean room operating protocol by serving as a reminder to all operators that they are entering a controlled environment. Personnel therefore develop the habit of gowning up properly before entering the air shower.
Material of Construction:
SS 304 / SS 316/ SS 316L / G.I Powder Coated.
Standard Features
⦁ Minipleat HEPA Filter EU-14 Grade, efficiency 99.999% down to 0.3μ.
⦁ Prefilters EU 6 Grade with average efficiency of 60-80% down to 5 μ.
⦁ AC Centrifugal Motor Blower with Regulator for speed controlling.
⦁ Magnehelic Differential Pressure Gauge.
⦁ Electro-Magnetic Interlocking card with OLED display controlling on either side of door to ensure that only one side door can be opened at a time. Manual On-Off Switches for Blower & LED Light adjustable Timer to set operation time.
⦁ SS 304, Mirror finish Nozzle for spraying the air.
⦁ SS Perforated Trays as footrest floor in bottom for air circulation.
⦁ SS Back to back handles on both sides for door opening
⦁ SS 304 double walled doors with toughened glass with SS 304 Handles & Hinges.
⦁ LED down light with 400 LUX.
⦁ PAO Test port for HEPA filter integrity test.
⦁ Emergency stop switch to shut off equipment in an emergency.
⦁ Door closer for closing doors.
⦁ SS 304 access panel inside of the unit for service & maintenance.
Options and Accessories available at an extra cost
⦁ PLC with Touch Screen HMI display controlling with Electro-Magnetic Interlocking system to ensure that only one side door can be opened at a time & adjustable Timer to set operation time.
⦁ Digital/Photohelic Gauge with High / Low Indicators
Performance
⦁ Air Velocities : 20 ± 2 mps per nozzle
⦁ Air Flow : Recirculatory
⦁ Noise Level : Less than 75 dB on Scale ‘A’
⦁ Vibration Level: Minimum
Power Supply
⦁ 415 V AC, 3Ø – 50-60HZ
STANDARD DIMENSIONS
De- Dusting Tunnel is designed to supply air at high velocity to remove particulate matter from the material entering the Clean Room facility. De-dusting tunnel is designed to reduce initial non-viable particles from the raw materials received in drums, cartons, bags etc. before they are transferred to warehouse while protecting personnel and environment. It is used to remove the loose particles/dust present on the receiving materials.
Material of Construction:
SS 304 / SS 316/ SS 316L / G.I Powder Coated.
Standard Features
⦁ Minipleat HEPA Filter EU-14 Grade, efficiency 99.999% down to 0.3μ.
⦁ Pre filters EU 6 Grade with average efficiency of 60-80% down to 5 μ.
⦁ AC Centrifugal Motor Blower with Regulator for speed controlling
⦁ Magnehelic Differential Pressure Gauge
⦁ Straight Belt conveyor (forward & reverse) with SS 304 Structure.
⦁ Anti-static vinyl curtains in front & back side i.e. at the in-feed and out-feed.
⦁ SS 304, Mirror finish Nozzle for spraying the air
⦁ LED down light with 400 LUX
⦁ PAO Test port for HEPA filter integrity test.
⦁ Emergency stop switch to shut off equipment in an emergency.
⦁ SS 304 access panel inside of the unit for service & maintenance.
Options and Accessories available at an extra cost
⦁ Digital/Photohelic Gauge with High / Low Indicators.
⦁ SS 304 manual rollers at the in feed while SS 304 motorized rollers
Inside the unit.
⦁ SS 304 double walled doors with toughened glass with SS 304 Handles & Hinges.
⦁ Motor operated automatic Rolling Shutter on front and back side.
⦁ PLC with Touch Screen HMI display controlling with Electro-Magnetic Interlocking system to ensure that only one side door can be opened at a time & adjustable Timer to set operation time.
⦁ UV light with Hour meter.
Performance
⦁ Air cleanliness : ISO Class 5 (ISO 14644-1:1999 (E))
⦁ Air Velocities : 20 ± 2 mps per nozzle
⦁ Air Flow : Recirculatory
⦁ Noise Level : Less than 75 dB on Scale ‘A’
⦁ Vibration Level : Minimum
Power Supply
⦁ 230 VAC, 1Ph, 50-60Hz
STANDARD DIMENSIONS
MOBILE LAMINAR AIR FLOW UNIT The offered battery-operated Mobile Vertical laminar air flow is commonly used for cleaning the air in Transport material from one area to another in Pharmaceuticals, operation theaters and surgery centers in hospitals. Our supplied battery-operated laminar air flow is available at competitive rates.
Mobile Vertical Laminar Flow Benches offers highest product protection for samples and processes by providing ISO Class 5 particle free work area. Vertical Laminar Air Flow Unit draws air through the top of the unit through a pre-filter, through a plenum and vertically down over the work-surface and past the lap of the operator. These units are suitable for the handling of non-hazardous products, sensible to dust and/or to contamination wherever operator protection is not required.
Material of Construction:
SS 304 / SS 316/ SS 316L / G.I Powder Coated.
Standard Features
⦁ Minipleat HEPA Filter EU-14 Grade, efficiency 99.999% down to 0.3μ
⦁ Pre filters EU 6 Grade average efficiency of 60-80% down to 5 μ.
⦁ AC Centrifugal Motor Blower with Regulator for speed controlling.
⦁ Magnehelic Differential Pressure Gauge.
⦁ Led Light with SS covering.
⦁ U. V. Light providing 256nm wavelength with Hour Meter
⦁ SS ON/OFF Switches for motor & Lights
⦁ PAO Test port for HEPA filter integrity test.
⦁ SS 304 access panel on front side for service & maintenance.
⦁ SS 304 channels for HEPA clamps covering.
⦁ SS 304 stands with PU Castor Wheel for movement: 2 lockable & 2 Regular.
⦁ 6/16 Amp single-phase switch socket for any external equipment.
⦁ Toughened Glass side View panels.
⦁ Antistatic PVC Strip overlapping curtains in front side of the unit.
⦁ Inverter with Dry Battery providing 30 minutes backup.
Performance
⦁ Air cleanliness: ISO Class 5 (ISO 14644-1:1999 (E) / Class 100
⦁ Air Velocities : 0.45 ± 0.05 mps@ 6 Inch below HEPA Terminal
⦁ Air Flow : Vertical – Recirculatory
⦁ Noise Level : Less than 75 dB on Scale ‘A’
⦁ Vibration Level: Minimum
STANDARD DIMENSIONS
Mist Shower Unit Workstation designed to Supply Non-Classified air & Water for Decontamination Station by spraying mist. The Misting Booth is a contamination control device for the respiratory protection from inhalation hazards to the operator during the de gowning process. When the occupant removes his/her protective clothing (PPE) he also removes his/her primary personnel protection (respirator). The misting booth is used to reduce the possible re-suspension of the particulate in the operators breathing zone. By virtue of what the misting booth is doing, it also reduces contamination into the de gowning area. The misting booth works by gently wetting the surface of an operator’s protective gown with a fine water mist, causing the powder to stick to the surface instead of becoming airborne.
Material of Construction:
SS 304 / SS 316/ SS 316L / G.I Powder Coated.
Standard Features
⦁ Water pressure gauge to measure the water jet pressure provided to working area.
⦁ PLC with Touch Screen HMI display controlling with Electro-Magnetic Interlocking system to ensure that only one side door can be opened at a time & adjustable Timer to set operation time.
⦁ SS door release switch on both sides.
⦁ SS Perforated Trays as footrest floor in bottom.
⦁ SS Back to back handles on both sides for door opening.
⦁ SS 304 double walled doors with toughened glass with SS 304 Handles & Hinges.
⦁ LED down light (water proof) with 400 LUX.
⦁ Drain point for Containment Water Drain.
⦁ SS 316 mist spray Nozzle with Flexible Hose Pipe for Compress Air and water.
⦁ SS Water Pump for providing the jet flow of water to take care of water flow requirement.
⦁ De- attachable fresh water tank.
⦁ Solenoid valve for air & water inlet & outlet.
⦁ Drain in water tank for tank cleaning.
⦁ Low & High Level Indication for Water Storage.
⦁ Emergency stop switch to shut off equipment in an emergency.
⦁ Door closer for closing doors.
⦁ SS 304 access panel inside of the unit for service & maintenance.
Power Supply
⦁ 415 VAC, 3 Phase 50 Hz
STANDARD DIMENSIONS
Garment Storage Cabinet is designed to provide ISO Class 5 (Class 100) particle free work area for storing sterile packed things to meet garment storage needs. It avoids any particulate accumulation between laundry wash & storage. The work area is continuously supplied with positive pressure HEPA filtered recirculated horizontal air flow.
Material of Construction:
SS 304 / SS 316/ SS 316L / G.I Powder Coated.
Standard Features
⦁ Minipleat HEPA Filter EU-14 Grade, efficiency 99.999% down to 0.3μ
⦁ Prefilters EU 6 Grade with average efficiency of 60-80% down to 5 μ.
⦁ Fresh Air Filter EU 6 Grade, with efficiency of 60-80% down to 5 μ.
⦁ AC Centrifugal Motor Blower with Regulator for speed controlling.
⦁ Electro-Magnetic Interlocking card with OLED display. Manual On-Off Switches for Blower, LED & UV Light.
⦁ Magnehelic Differential Pressure Gauge.
⦁ Led Light with SS covering.
⦁ U. V. Light providing 256nm wavelength with Hour Meter.
⦁ SS ON/OFF Switches for motor & Lights.
⦁ PAO Test port for HEPA filter integrity test.
⦁ SS 304 access panel on front & both sides for service & maintenance.
⦁ SS 304 removable perforated shelves.
⦁ Nylon Pads in Bottom.
⦁ Heater with thermostat.
⦁ SS 304 double walled doors with toughened glass with SS 304 Handles & Hinges.
⦁ 6/16 Amp single-phase switch socket for any external equipment.
⦁ SS magnets for keeping the door locked during power failure condition.
Options and Accessories available at an extra cost
⦁ Audio / Visual alarm for blower tripping with Fault Acknowledgement & Reset Switch.
⦁ Digital/Photohelic Gauge with High / Low Indicators.
⦁ SS rod for hanging the clothes.
⦁ Inverter with Dry Battery providing 30 minutes backup.
⦁ PU Caster Wheel for movement: 2 lockable & 2 Regular.
Performance
⦁ Air cleanliness: ISO Class 5 (ISO 14644-1:1999 (E)) / Class 100
⦁ Air Velocities : 0.45 ± 0.05 mps@ 6 Inch below HEPA Terminal
⦁ Air Flow : Vertical – Recirculatory
⦁ Noise Level : Less than 75 dB on Scale ‘A’
⦁ Vibration Level: Minimum
Power Supply
⦁ 230 VAC, 1 Phase, 50 Hz
STANDARD DIMENSIONS
We are into offering supreme quality Garment Storage Cabinet, which is made in compliance with world class standards. Garment Storage Cabinet designed to packed things to meet garment storage needs. It avoids any particulate accumulation between laundry wash & storage.
Material of Construction:
SS 304 / SS 316/ SS 316L / G.I Powder Coated.
Standard Features
⦁ Led Light with SS covering.
⦁ U. V. Light providing 256nm wavelength with Hour Meter.
⦁ Electro-Magnetic Interlocking card with OLED display .Manual On-Off Switches for LED & UV Light.
⦁ SS ON/OFF Switches for LED & UV Lights
⦁ SS 304 removable perforated shelves
⦁ SS 304 double walled doors with toughened glass with SS 304 Handles & Hinges.
⦁ SS Magnets to keep the door locked during power failure condition
⦁ SS 304 access panel on top side for service & maintenance
Options and Accessories available at an extra cost
⦁ SS rod for hanging the clothes
⦁ PU Caster Wheel for movement: 2 lockable & 2 Regular.
Power Supply
⦁ 230 V AC, 1 Phase- 50 Hz
STANDARD DIMENSIONS
Biological Safety Cabinet Class II provides personnel, environmental and product protection. Air flow is drawn around the operator into the front grill of the cabinet, which provides personnel protection. In addition, the down ward laminar flow of HEPA-filtered air provides product protection by minimizing the chance of cross-contamination along the work surface of the cabinet. Because cabinet air has passed through the exhaust HEPA filter, it is contaminant-free (environmental protection). Class II BSCs have inward face velocities (90 feet per minute) that provide comparable levels of containment to protect laboratory workers and the immediate environment from infectious aerosols generated within the cabinet. Class II BSC also protect the research material itself through high-efficiency particulate air filtration (HEPA filtration) of the airflow down across the work surface (vertical laminar flow).Class II BSCs are classified into two types (A and B) based on construction, airflow velocities and patterns.
Class II type A2: It re-circulates 70% of HEPA filtered laminar air While 30% passes through system exhaust HEPA to ambient.
Class II type B2: This is single pass system. It exhausts 100% of HEPA filtered air from the system to ambient.
Material of Construction:
SS 304 / SS 316/ SS 316L / G.I Powder Coated.
Standard Features:
⦁ Minipleat Exhaust & Supply HEPA Filters EU-14 Grade, efficiency 99.999% down to 0.3 μ.
⦁ Pre filters EU 6 Grade with average efficiency of 60-80% down to 5 μ.
⦁ AC Centrifugal Motor Blower with Regulator for speed
⦁ OLED display: OLED displays all the parameters including date, time, Filter and UV lamp working time, inflow and down flow air velocity, temperature, system working time, ON/OFF for blower operation, UV germicidal light, Led Light. A high-quality air velocity sensor helps in sensing the actual air flow in FPM.
⦁ 1-piece fully open-able sliding toughened Glass front door with counter weight arrangement.
⦁ Led Light with SS covering.
⦁ SS 304 stands with leveling pads.
⦁ SS 304 working table.
⦁ SS 304 Perforated grills on back walls for return air.
⦁ 6/16 Amp single-phase switch socket for any external equipment.
⦁ Alarm triggers in case front door is raised more than 8” (i.e. safe clear opening during operation).
⦁ PAO Test port for HEPA filter integrity test.
⦁ SS 304 Air Gas Cock.
⦁ UV Light with Hour Meter.
⦁ Drain provision for cleaning.
⦁ SS 304 access panel on front of the unit for service & maintenance.
Options & Accessories available at an Extra Cost
⦁ SS 304 protective grill below HEPA filter
⦁ SS 304 duct for exhaust (height to be confirm by client)
⦁ Variable Frequency Drive for motor blower for speed controlling.
Performance
⦁ Air cleanliness: ISO Class 5 (ISO 14644-1:1999 (E)) / Class 100
⦁ Air Velocities : 0.45 ± 0.05 mps@ 6 Inch below HEPA Terminal
⦁ Air Flow : Vertical – Recirculatory
⦁ Noise Level : Less than 75 dB on Scale ‘A’
⦁ Vibration Level: Minimum
Power Supply
⦁ 230 VAC, 1Ph, 50-60Hz
STANDARD DIMENSIONS
Cleanroom Equipment is specially designed to maintain contamination-controlled environments by minimizing airborne particles, microbial contamination, and cross-contamination. These systems are widely used in pharmaceutical manufacturing, biotechnology, healthcare, electronics, semiconductor industries, research laboratories, food processing, and precision engineering facilities. Our cleanroom equipment is manufactured in compliance with international cleanroom standards to ensure superior performance, reliability, and long service life.
✓ Designed to achieve ISO Class 5 to ISO Class 8 cleanroom environments (ISO 14644-1)
✓ HEPA Filtration Efficiency: 99.99% @ 0.3 Micron
✓ ULPA Filtration (Optional): 99.9995% @ 0.12 Micron
✓ Air Velocity: 0.45 ± 0.05 m/s (where applicable)
✓ Airflow Pattern: Vertical / Horizontal Laminar Flow
✓ Noise Level: Less than 70 dB(A)
✓ Low Vibration Design
✓ Energy Efficient Operation
✓ Easy Validation and Qualification
✓ Continuous Reliable Performance
✓ Suitable for 24×7 Industrial Operation
Standard sizes are available based on equipment type. Customized dimensions can be manufactured according to customer requirements, cleanroom layout, and process specifications.
Mobile Trolley is designed for transporting sterile products under ISO Class 5 (Class 100) particle free work area. The work area is continuously supplied with positive pressure HEPA filtered recirculated horizontal air flow.
Material of Construction:
SS 304 / SS 316/ SS 316L / G.I Powder Coated.
Standard Features
⦁ Minipleat HEPA Filter EU-14 Grade, efficiency 99.999% down to 0.3μ.
⦁ Prefilters EU 6 Grade with average efficiency of 60-80% down to 5 μ.
⦁ Fresh Air Filter EU 6 Grade, with efficiency of 60-80% down to 5 μ.
⦁ AC Centrifugal Motor Blower with Regulator for speed controlling.
⦁ Magnehelic Differential Pressure Gauge.
⦁ Led Light with SS covering.
⦁ U. V. Light providing 256nm wavelength with Hour Meter.
⦁ SS ON/OFF Switches for motor & Lights.
⦁ PAO Test port for HEPA filter integrity test.
⦁ SS 304 access panel on front & both sides for service & maintenance.
⦁ SS 304 removable perforated shelves.
⦁ SS 304 double walled doors with toughened glass with SS 304 Handles & Hinges.
⦁ PU Caster Wheel for movement: 2 lockable & 2 Regular.
⦁ 6/16 Amp single-phase switch socket for any external equipment.
⦁ Inverter with Dry Battery providing 30 minutes backup.
⦁ SS magnets for keeping the door locked during power failure condition.
Options and Accessories available at an extra cost
⦁ Audio / Visual alarm for blower tripping with Fault Acknowledgement & Reset Switch.
⦁ Digital/Photohelic Gauge with High / Low Indicators.
⦁ Variable Frequency Drive for motor blower for speed controlling.
⦁ Flame Proof Execution as Explosion proof electrics for Flame-proof
Applications.
Power Supply
⦁ 230 VAC, 1Ph, 50-60Hz & for FLP 415 VAC, 3Ph, 50-60Hz
Performance
⦁ Air cleanliness: ISO Class 5 (ISO 14644-1:1999 (E)) / Class 100
⦁ Air Velocities : 0.45 ± 0.05 mps@ 6 Inch below HEPA Terminal
⦁ Air Flow : Vertical – Recirculatory
⦁ Noise Level : Less than 75 dB on Scale ‘A’
⦁ Vibration Level: Minimum
STANDARD DIMENSIONS
Air Curtain is designed to create an invisible high-velocity air barrier across door openings, preventing the entry of dust, insects, smoke, odors, airborne contaminants, and unconditioned air while maintaining a clean and controlled indoor environment. It helps improve energy efficiency by minimizing the loss of conditioned air and reducing the load on HVAC systems. Air Curtains are widely used in pharmaceutical industries, hospitals, laboratories, food processing units, cleanrooms, warehouses, commercial buildings, and industrial facilities.
✓ High Air Velocity: Up to 18–22 m/s (Depending on Model)
✓ Uniform Air Distribution Across Entire Door Width
✓ Effective Protection Against Dust, Insects & Airborne Contaminants
✓ Reduces Conditioned Air Loss
✓ Improves HVAC Energy Efficiency
✓ Noise Level: Less than 70 dB(A)
✓ Continuous Duty Operation
✓ Low Power Consumption
✓ Smooth & Vibration-Free Performance
✓ Suitable for Door Heights up to 4–5 Meters (Model Dependent)
Standard models are available in the following lengths:
Custom sizes can be manufactured to suit specific door widths and customer requirements.
Syluxa is an expert leading lab furniture manufacturer in India. We have a wide range of laboratory furniture for your lab, be it an R&D lab, QC lab, educational lab, micro lab or a third-party testing lab; you are all covered with Syluxa furniture.
Based on the application, there are various types to choose from:
Fixed plinth-based lab furniture: suitable for educational, quality control and diagnostics labs
Flexible C-frame type lab furniture: suitable for heavy-duty research labs
Stainless steel lab furniture: suitable for clean rooms, food labs and hospital labs Syluxa furniture is tested for SEFA 8M & 10 compliance by Intertek.
We are present in Mumbai, Pune, Delhi, Bangalore, Hyderabad, Indore, Kolkata, Vadodara & Guwahati.
FLEXIS LAB FURNITURE (C FRAME SERIES) FLEXIBLE LAB FURNITURE FOR DEMANDING LAB ENVIRONMENTS
C frame systems are the modern lab furniture architecture. Based on a cantilevered design, C-frame systems do not need plinth for support. Flexis C-Frame systems are highly flexible and adaptable to changing demands of the lab. They are relatively easy to shift and allow for easy portability of the under-bench cabinets. Flexis also offers you a high load bearing capacity. Additionally, they also offer you easy access to the rear ducts, so that utility & drain line maintenance is simple and stress free. The Flexis range has C-frame systems for both standing and sitting height. Available options: Flexis
Flexi-mobile (on castors) Suitable for: Research & development labs
ACTIS LAB FURNITURE (PLINTH BASED SERIES) FIXED LAB FURNITURE FOR MODULARITY
Actis series is classic heavy-duty laboratory furniture. All cabinets are fixed on a plinth with the worktop installed above the cabinets. This series offers you modularity and value for money. ACTIS offers you modularity and aesthetics and is the value for money route to creating the lab of the future. Plinth type system is the classic lab furniture architecture. A Plinth type system uses under bench cabinets which are supported by metallic plinth. ACTIS offers you modularity and aesthetics and is the value for money route to creating the lab of the future. Suitable for: QC/QA labs, hospital labs, diagnostic labs and educational labs.
General Chemical Storage: Our chemical storage cabinets are designed to provide secure and compliant storage solutions for a wide range of chemicals, ensuring the safety of your laboratory personnel and environment. It has 4 adjustable shelves and 1 fixed shelf. Each shelf has 2 PP trays in it. The entire cabinet has flow control valve ready to connect to ductwork and blower. Ventilated Auto Exhaust – the auto exhaust system periodically vents the air in the cabinet to avoid fume build-up
Chemical resistant MOC The dimensions are: 500 mm (L) X 450 mm (D) X 1800 mm (H) The dimensions are: 1000 mm (L) X 450 mm (D) X 1800 mm (H)
Flammable Solvents Storage Cabinets: We represent several leading global storage cabinet brands in India, giving you a wide choice of high-quality flammable material storage cabinets.
American-type cabinets: conform to all appropriate American standards NFPA and OSHA
4 to 90 gallon sizes available
Fire rating of 10 minutes as per NFPA Code 30
Popular models are FM-approved
Slotted Angle Racks : For open chemical storage & sample storage area Extremely durable
Powder coated GI structure Heavy duty racks – 60 kg load bearing per shelf Dimensions:
1000 mm(L) x 450 mm (D) x 1800 mm(H)
Overhead File Storage Cabinet
for Island table
Sliding glass shutters/openable GI shutters
Made of powder-coated GI sheets
The dimensions are: 450 mm (D) X 450 mm (H) X Variable (L)
Polypro Cabinet: India’s first fully featured chemical storage cabinet made from high-quality imported Polypropylene sheet, complying with all international standards and exceptional for highly corrosive applications. We also offer many optional features developed by us in-house which add safety to your lab. The entire cabinet has flow control valve ready to connect to ductwork and blower.
Size: 1000 mm (L) x 450 mm (W) x 1800 mm (H)
MOC: Polypropylene (imported)
Two fixed shelves and three adjustable shelves Each shelf has PP trays
Polycarbonate sheet for door to get a clear view Exhaust system with night mode
Alarm system if door remains open for a long time
Overhead Storage Cabinet
One adjustable shelf and a fixed shelf.
Glass shutters
Made up of powder-coated GI
The dimensions are: 750 mm (L) X 370 mm (D) x 750 mm (H)
Glassware/ File Storage Cabinet
2/3 adjustable shelf and 1 fixed shelf
Glass Shutters
Made up of powder coated GI
Full Height Dimensions:
1000 mm(L) x 450 mm (D) x 1800 mm(H)
Half Height Dimensions:
1000 mm(L) x 450 mm (D) x 900 mm(H)
(with laminate top)
Stainless Steel Lab Furniture: For Ultra-clean Environments Matt finish premium SS 304 furniture has superior aesthetics and excellent functionality. The worktops, modules and base pedestals are all made up of SS 304. It is almost completely integrated with SS 304, down to even the smallest components like hinges and drawer slides. We can also manufacture SS 316 grade laboratory furniture in our facility for food-grade applications. Suitable for: Cleanrooms, food labs and hospital labs.
we will answer your question within 24hrs via email.
